Teknatool Lathe (showing results 1-10 of total 53)

|<< 1 2 3 4 5 6 >>|

COLE JAW SET FOR NOVA CHUCKS From: $74.95 This may be the best thing, other then a vacuum chuck, for reverse chucking a bowl. Why do you need to reverse a bowl... To take the mount (be it a tenon or face plate) off and improve the looks of the base The major downside to this jaw set, is if you use it on ANY chuck, other then a Titan. The reason is the SN, SN2, G3 and Midi all have a smaller range of adjustment, then th... 2 product reviews available	SUPERNOVA 2 CHUCK W/2" JAWS, 4" POWERGRIP JAWS, WW SCREW, & INSERT From: $224.95 I got this to go with a Jet lathe (see my review of that) that was lying fallow at work and boy, has it been great. It came with two sets of dovetail inside-outside jaws .The jaws are numbered to keep them in the factory machining order, so use a sharpie to make it easier to tell which is which when you change them. They need to be put on in the right order for balance. This lovely thi... 2 product reviews available
NOVA MIDI CHUCK 3/4" X 16 TPI From: $79.95 This new chuck from Nova replaces both the original standard Nova chuck and the Nova Compac. It uses the standard Nova jaws (no adaptors required as the Compac did - accepts Nova's extensive line of optional jaw sets), is slightly smaller than the original Nova (3 1/2" vs 4"), and uses the scroll type action with two tommy bars. Included in the package are a set of 2" (50mm) dovetail jaws, two to... No product reviews available	130mm Jumbo Jaws From: $49.99 The 130mm Jumbo Jaws are for holding large bowls and platters. Jaws are primarily designed for work over 16" in diameter up to a maximum of 29-1/2". Jaws will grip spigots from 4.2" to 5" and expand into dovetailed recesses from 4.88" to 5.86". Fits SuperNova2 and Titan chucks only.Designed for work over 16" in diameter up to a maximum of 29-1/2". Expand into dovetailed recesses from 4.88" to 5.8... No product reviews available
Long Nose Jaw Set From: $59.99 Nova jaw sets add even greater versatility to the Nova Midi, SuperNova2 and Nova Titan chucks. Each set is precision machined from a high quality solid steel billet and comes with an easy to read instruction manual. Long Nose Jaw Set features an internal dovetail and threaded serrations. This new jaw has a superior grip in the spigot mode - ideal for holding larger and longer tenons. The extra lo... No product reviews available	Nova Jaw Set, 25mm From: $37.99 The 25mm Jaw Set substitutes for the standard 50mm jaws for use on small work with 3/8"-1-1/4" spigots, as a type of pin chuck with 1" capacity, for expanding dovetail work on bowls up to 6" dia. and for 1/2"-1" square blanks.For use on small work with 3/8"-1-1/4" spigots. Ideal for bowls up to 6" diameter. Superior Grip. ... No product reviews available
SUPERNOVA 2 CHUCK W/2" JAWS, WOODWORM SCREW, AND INSERT & 25MM PIN JAW SET From: $209.95 Nova has reworked the extremely popular Supernova chuck, and reintroduced it as the Supernova 2. The biggest changes are replacing the keyed pinion with a fixed pinion & Allen key opening/closing mechanism, a closed back, and faster action. Check these specifications: -Hard-wearing heavy duty, composite indexing backing plate. -Captured pinion with rotation arrow (like the Titan chuck). Makes it ... No product reviews available	NOVA G3 WOODLATHE CHUCK WITH 2" JAWS, WOODWORM SCREW, & INSERT From: $114.95 The latest addition to the Nova Chuck line. Fitting nicely in between the Nova Midi chuck and the Supernova 2 chuck, the G3 is an economical option featuring the fast one handed operation of the keyed articulation at price that is more affordable than anything of this quality and with this many features on the market. Yes, it also accepts all other Nova and Super Nova accessories, and is ideal fo... No product reviews available
SUPERNOVA 2 CHUCK W/2" JAWS, WOODWORM SCREW, AND INSERT From: $184.95 Being relatively new to woodturning and wanting something to turn other than pens I bought this item. It is a nice solid piece of equipment. The hex t-handle is very easy to use to tighten with only one hand. So far the standard 2 inch jaws are all I have used but they work well when gripping a 1/4 inch dovetailed grip in the wood. The woodworm screw is also very solid in the wood. have not h... 8 product reviews available	1"-12 TPI RH Insert From: $22.99 Teknatool uses an easy and inexpensive insert/adaptor system on all its NOVA chucks (apart from the Compac). The insert has different lathe spindle thread sizes internally, and simply screws into the back of your Nova chucks. Once the insert is in place, you can then put your chuck onto your lathe.Adapts any NOVA chuck to almost any lathe spindle at low cost.. The insert/adaptor versions of NOV... No product reviews available

Recommended Blogs

Shopsmith Mk V #1: First Impressions - by NedB | LumberJocks.com ...
I believe you have added a zero to the powerpro head stocks low speed, it is also 100 not 1000. This is the same as the Teknatool NOVA DVR XP lathe in that respect. Ed. -- Knight of the Shopsmith. View NedB's profile ...

What lathe should I get for pen turning? - Woodwork Forums
I must confess I hadn't seen the Teknatool Mercury lathe before, looked it up on the Teknatool website and it is still listed there. The specifications are certainy very attractive, like that variable speed DC motor and some of the ...

Carroll's @ Melbourne Working With Wood Show 2009 - Woodwork Forums
Brendan Stemp demonstrating on the Stubbie SL250 Lathe with the Woodcut tools & Accessories. Other bits of Interest Woodcut Bowl Saver & Hollowing Tools Teknatool lathes, Chuck & Accessories Vicmarc Chucks, Lathes & Accessories ...

Nova Midi Chuck Titan, Nova Midi Lathe Chuck, Chuck E In Love Midi
NOVA G3 WOODLATHE CHUCK WITH 2 JAWS WOODWORM SCREW INSERT a˜… Long Nose Jaw Set a˜… 1"-8 TPI R&L Insert a˜… NOVA MIDI CHUCK 1 X 8 TPI - NEWER UPDATED VERSION a˜… "Teknatool Precision Midi Chuck 1""-8tpi" a˜… Spur Drive Center ...

SUPERNOVA 2 CHUCK W/2" JAWS, 4" POWERGRIP JAWS, WW SCREW, & INSERT
This is my second chuck from Teknatool. The first is a midi scroll chuck with which I am quite happy. The supernova is beautifully made and smooth operating. I cannot detect any vibration or runout even at high speeds. ...

Similar Products

Nova TeknaTool Teknatool Lathe (39 results) Nova Teknatool Lathe (39 results) Teknatool Midi Wood Lathe (1 results) Teknatool Nova Wood Lathe Chuck Set (3 results) Teknatool TeknaTool Lathe (43 results) Teknatool Wood Lathe (17 results)

Ace Wood Lathe (14 results) Ace Wood Lathe Chisel (14 results) Bison Lathe Chuck (44 results) Bolton Benchtop Wood Lathe (1 results) Bolton Portable Wood Lathe (0 results) Bolton Wood Lathe (2 results) Boston Industrial Wood Lathe (1 results) CMT Industrial Portable Wood Lathe (1 results) CMT Industrial Wood Lathe (1 results) Crown Wood Lathe (12 results) Crown Wood Lathe Chisel (2 results) DELTA Variable Speed Wood Lathe (0 results) Delta Benchtop Wood Lathe (0 results) Delta Wood Lathe (9 results) Delta Wood Lathe Center (1 results) Excelsior Mini Wood Lathe (2 results) Excelsior Wood Lathe (2 results) General International Variable Speed Wood Lathe (1 results) General International Wood Lathe (3 results) General International Wood Lathe Duplicator (0 results)

|<< 1 2 3 4 5 6 >>|

Refinements
Please use the below search box to refine your results. Replace the ***** with any new key phrase (e.g. brand name, color, feature) and we will try to serve you a list of products to fit your requirements.
Sample refinements (by popular brands):
Teknatool Teknatool Lathe Nova Teknatool Lathe